ZyXEL Communications NWA1000 Series User Manual Download Page 23

Page: 23 / 263

Chapter 3 Hardware

NWA1000 Series User’s Guide

3.1.4 NWA1302-AC

By default, the LEDs automatically turn on when the NWA1302-AC is ready. If the

Suppression On

option

is selected in the

LEDs > Suppression

screen (see

Section 19.2 on page 183

) to turn off the LEDs, you can

press the

LED ON

button for one second to turn on the LEDs again. The LEDs will blink and turn off after

two minutes.

Figure 8

NWA1302-AC LEDs

The following table describes the LEDs.

Table 5 NWA1302-AC LEDs

LED

COLOR

STATUS

DESCRIPTION

PWR/SYS

Red

Slow Blinking (On for 1
sec, Off for 1 sec)

The LED blinks orange and green alternatively when the
NWA1000 Series is booting up.

Green

The NWA1000 Series is ready for use.

Slow Blinking (On for 1
sec, Off for 1 sec)

The wireless module of the NWA1000 Series is disabled or
failed.

Red

There is system error and the NWA1000 Series cannot
boot up, or the NWA1000 Series suffered a system failure.

Fast Blinking (On for 50
ms, Off for 50 ms)

The NWA1000 Series is doing firmware upgrade.

Slow Blinking (Blink for 3
times, Off for 3 sec)

The Uplink port is disconnected.

Management

Green/
Amber

Off

The NWA1000 Series is in standalone mode.

UPLINK

Amber/
Green

Amber - The port is operating as a 10/100-Mbps
connection.

Green - The port is operating as a Gigabit connection
(1000 Mbps).

Blinking

The NWA1000 Series is sending/receiving data through
the port.

Off

The port is not connected.

WLAN

Green

The 2.4 GHz WLAN is active.

Off

The 2.4 GHz WLAN is not active.

Summary of Contents for NWA1000 Series








































































































































































































































































Search results

Summary of Contents for NWA1000 Series

Reviews:

ZyXEL Communications NWA1000 Series, User Manual, Page: 23 / 263

Search results

Summary of Contents for NWA1000 Series

Reviews: