Chapter 15 System
NWA1000 Series User’s Guide
152
1
Test whether the SSH service is available on the NWA1000 Series.
Enter “
telnet 192.168.1.2 22
” at a terminal prompt and press
[ENTER]
. The computer attempts to
connect to port 22 on the NWA1000 Series (using the default IP address of 192.168.1.2).
A message displays indicating the SSH protocol version supported by the NWA1000 Series.
Figure 96
SSH Example 2: Test
2
Enter “
ssh –2 192.168.1.2
”. This command forces your computer to connect to the NWA1000 Series
using SSH version 1. If this is the first time you are connecting to the NWA1000 Series using SSH, a message
displays prompting you to save the host information of the NWA1000 Series. Type “
yes
” and press
[ENTER]
.
Then enter the password to log in to the NWA1000 Series.
Figure 97
SSH Example 2: Log in
3
The CLI screen displays next.
15.6 Telnet
You can use Telnet to access the NWA1000 Series’s command line interface. Click
Configuration >
System > TELNET
to configure your NWA1000 Series for remote Telnet access. Use this screen to enable or
disable Telnet and set the server port number.
Figure 98
Configuration > System > TELNET
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5
-1.0.0
$ ssh –2 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
[email protected]'s password: