NWA1000 Series User’s Guide
46
C
HAPTER
6
Setup Wizard
6.1 Accessing the Wizard
When you log into the Web Configurator for the first time or when you reset the NWA1000 Series to its
default configuration, the wizard screen displays.
Note: If you have already configured the wizard screens and want to open it again, click the
Wizard
icon on the upper right corner of any Web Configurator screen.
6.2 Using the Wizard
This wizard helps you configure the NWA1000 Series IP address, change time zone, daylight saving and
radio settings, and edit an SSID profile to change general wireless and wireless security settings.
6.2.1 Step 1 Time Settings
Use this screen to configure the NWA1000 Series’s country code, time zone and daylight saving time.
•
Country Code
: Select the country where the NWA1000 Series is located.
Note: The country code field is not available and you cannot change the country code if the
NWA1000 Series products comply with the U.S. laws, policies and regulations and are to
be sold to the U.S. market.
•
Time Zone
: Select the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
•
Enable Daylight Saving
: Select the option if you use Daylight Saving Time. Configure the day and time
when Daylight Saving Time starts and ends.
•
Offset
allows you to specify how much the clock changes when daylight saving begins and ends.
Enter a number from 1 to 5.5 (by 0.5 increments).
Click
Next
to proceed. Click
Cancel
to close the wizard without saving.
