ZyXEL Communications NWA1000 Series User Manual Download Page 28

Page: 28 / 263

Chapter 3 Hardware

NWA1000 Series User’s Guide

3.2.4 NWA1302-AC

By default, the LEDs automatically turn on when the NWA1302-AC is ready. If the LEDs are turned off by
the NCC, you can press the

LED ON

button for one second to turn on the LEDs again. The LEDs will blink

and turn off after two minutes.

Figure 12

MWA1302-AC LEDs

The following table describes the LEDs.

Table 9 NWA1302-AC LEDs

LED

COLOR

STATUS

DESCRIPTION

PWR/SYS

Red

Slow Blinking (On for 1
sec, Off for 1 sec)

The LED blinks orange and green alternatively when the
NWA1000 Series is booting up.

Green

The NWA1000 Series is ready for use.

Slow Blinking (On for 1
sec, Off for 1 sec)

The wireless module of the NWA1000 Series is disabled or
failed.

Red

There is a system error and the NWA1000 Series cannot
boot up, or the NWA1000 Series suffered a system failure.

Fast Blinking (On for 50
ms, Off for 50 ms)

The NWA1000 Series is doing firmware upgrade.

Slow Blinking (Blink for 3
times, Off for 3 sec)

The

Uplink

port is disconnected.

Management

Green

The NWA1000 Series is managed by the NCC.

Slow Blinking (On for 1
sec, Off for 1 sec)

The NWA1000 Series is connected to the NCC, but not
registered.

Amber

Slow Blinking (On for 1
sec, Off for 1sec)

The NWA1000 Series is searching for (discovering) the
NCC.

UPLINK

Amber/
Green

Amber - The port is operating as a 10/100-Mbps
connection.

Green - The port is operating as a Gigabit connection
(1000 Mbps).

Blinking

The NWA1000 Series is sending/receiving data through
the port.

Off

The port is not connected.

Summary of Contents for NWA1000 Series








































































































































































































































































Search results

Summary of Contents for NWA1000 Series

Reviews:

ZyXEL Communications NWA1000 Series, User Manual, Page: 28 / 263

Search results

Summary of Contents for NWA1000 Series

Reviews: