manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 106 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 106

Chapter 12 AP Profile

NWA1000 Series User’s Guide

106

Figure 65   

Configuration > Object > AP Profile > SSID > SSID List (After wizard setup) 

The following table describes the labels in this screen.  

12.3.2  Add/Edit SSID Profile

This screen allows you to create a new SSID profile or edit an existing one. To access this screen, click the 

Add

 button or select a SSID profile from the list and click the 

Edit

 button.

Table 45   Configuration > Object > AP Profile > SSID List

LABEL

DESCRIPTION

Add

Click this to add a new SSID profile. 

This button is not available after you configure the NWA1000 Series

 

using the wizard.

Edit

Click this to edit the selected SSID profile.

Remove

Click this to remove the selected SSID profile.

This button is not available after you configure the NWA1000 Series

 

using the wizard.

Object 
Reference

Click this to view which other objects are linked to the selected SSID profile (for example, radio 
profile).

#

This field is a sequential value, and it is not associated with a specific user.

Profile Name

This field indicates the name assigned to the SSID profile.

SSID

This field indicates the SSID name as it appears to wireless clients.

Security Profile

This field indicates which (if any) security profile is associated with the SSID profile.

QoS

This field indicates the QoS type associated with the SSID profile.

MAC Filtering 
Profile

This field indicates which (if any) MAC filter Profile is associated with the SSID profile.

Layer-2 Isolation 
Profile

This field indicates which (if any) layer-2 isolation Profile is associated with the SSID profile.

VLAN ID

This field indicates the VLAN ID associated with the SSID profile.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments