manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 20 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 20

Chapter 3 Hardware

NWA1000 Series User’s Guide

20

The following table describes the LEDs.

    

Table 2   NWA1123-AC PRO LEDs

LED

COLOR

STATUS

DESCRIPTION

PWR/SYS 

Red

Slow Blinking (On for 1 
sec, Off for 1 sec)

The LED blinks orange and green alternatively when the 
NWA1000 Series is booting up.

Green

On

Green

On

The NWA1000 Series is ready for use.

Red

On

There is system error and the NWA1000 Series cannot 
boot up, or the NWA1000 Series suffered a system failure.

Red

Fast Blinking (On for 50 
ms, Off for 50 ms)

The NWA1000 Series is doing firmware upgrade.

Red Slow 

Blinking (Blink for 3 

times, Off for 3 sec)

The 

Uplink

 port is disconnected.

Green

Slow Blinking (On for 1 
sec, Off for 1 sec)

The wireless module of the NWA1000 Series is disabled or 
failed.

Management

Green/
Amber

Off

The NWA1000 Series is in standalone mode.

WLAN

Green

On

The antenna switch is set to “Ceiling” for the radio.

The 2.4 GHz WLAN is active.

Amber

On

The antenna switch is set to “Wall” for the radio.

The 2.4 GHz WLAN is active.

Off

The 2.4 GHz WLAN is not active.

WLAN

Green

On

The antenna switch is set to “Ceiling” for the radio.

The 5 GHz WLAN is active.

Amber

On

The antenna switch is set to “Wall” for the radio.

The 5 GHz WLAN is active.

Off

The 5 GHz WLAN is not active.

UPLINK

Amber/
Green

On

Amber - The port is operating as a 100-Mbps connection.

Green - The port is operating as a Gigabit connection 
(1000 Mbps).

Blinking

The NWA1000 Series is sending/receiving data through 
the port.

Off

The port is not connected.

LAN

Amber/
Green

On

Amber - The port is operating as a 100-Mbps connection.

Green - The port is operating as a Gigabit connection 
(1000 Mbps).

Blinking

The LAN port is sending/receiving data through the port.

Off

The LAN port is not connected.

 Locator

White

Blinking

The Locator is activated and will show the actual location 
of the NWA1000 Series between several devices in the 
network.

Off

The Locator function is off.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments