manualshive.com logo in svg

ZyXEL Communications NWA1000 Series, User Manual, Page: 27 / 263

Share
Download
ZyXEL Communications NWA1000 Series User Manual Download Page 27

 Chapter 3 Hardware

NWA1000 Series User’s Guide

27

Figure 11   

NWA1123-AC HD LED  

The following are the LED descriptions for your NWA1123-AC HD. 

Table 8   NWA1123-AC HD LED

COLOR

STATUS

DESCRIPTION

Amber

Blinks amber for 1 second 
and green for 1 second 
alternatively.

The NWA1000 Series is booting up.

Green

Amber

Blinks amber and green 
alternatively 3 times and 
then turns solid green for 3 
seconds.

The NWA1000 Series is discovering the NCC.

Green

Green

Slow Blinking (On for 1 
second, Off for 1 second)

The wireless module of the NWA1000 Series is disabled or fails, 
the NWA1000 Series is in cloud mode but not registered with 
the NCC.

Green

Steady On

The NWA1000 Series is ready for use, the NWA1000 Series’s 
wireless interface is activated, and/or wireless clients are 
connected to the NWA1000 Series when it receives power 
using IEEE 802.3at PoE plus (full power mode).

Amber

Steady On

The NWA1000 Series is ready for use, the NWA1000 Series’s 
wireless interface is activated, and/or wireless clients are 
connected to the NWA1000 Series when it receives power 
using 802.3af PoE (limited power mode).

Bright Blue

Steady On

The NWA1000 Series’s wireless interface is activated, but there 
are no wireless clients connected when it receives power 
using IEEE 802.3at PoE plus (full power mode).

White

Steady On

The NWA1000 Series’s wireless interface is activated, but there 
are no wireless clients connected when it receives power 
using 802.3af PoE (limited power mode).

Blue

Slow Blinking (Blink for 1 
time, Off for 1 second)

The NWA1000 Series is performing a Channel Availability 
Check (CAC) with Dynamic Frequency Selection (DFS) to 
monitor a channel for radar signals.

Red

On

The NWA1000 Series failed to boot up or is experience system 
failure.

Fast Blinking (On for 50 
milliseconds, Off for 50 
milliseconds)

The NWA1000 Series is undergoing firmware upgrade.

Summary of Contents for NWA1000 Series








































































































































































































































































Reviews:

No comments