ZyXEL Communications AAM1212-51, User Manual

Page: 308 / 435

AAM1212-51/53 Series User’s Guide
308 Chapter 46 MAC Commands
46.3.4 MAC Count Set Command
Syntax:
ras> switch mac count set <portlist> <count>
where
This command sets the limit for how many MAC addresses may be dynamically learned on
the specified DSL port(s).
The following example sets the MAC count filter to allow up to 50 MAC addresses to be
dynamically learned on DSL port 7.
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
<count> =
Set the limit for how many MAC addresses that a port may
dynamically learn. For example, if you are configuring port 2
and you set this field to "5", then only five devices with
dynamically learned MAC addresses may access port 2 at any
one time. A sixth device would have to wait until one of the five
learned MAC addresses ages out.
The valid range is from “1” to “128”.
Figure 172 MAC Count Set Command Example
ras> switch mac count set 7 50