ZyXEL Communications AAM1212-51, User Manual

Page: 58 / 435

AAM1212-51/53 Series User’s Guide
58 Chapter 4 Introducing the Web Configurator
User Account Use this screen to configure system administrator accounts.
Switch Setup Use this screen to set up system-wide parameters such as MAC address
learning and priority queues.
IP Setup Use this screen to configure the system and management IP addresses and
subnet masks.
ENET Port Setup Use this screen to configure settings for the Ethernet ports.
xDSL Port Setup Use these screens for configuring settings for individual DSL ports.
xDSL Profiles Setup Use these screens for configuring profiles for the DSL ports.
xDSL Line Data Use these screens for viewing DSL line operating values, bit allocation and
performance counters.
Advanced
Application
VLAN Use these screens for viewing and configuring the VLAN settings.
IGMP Use these screens to view IGMP status information and configure IGMP settings
and IGMP filters. You can also use these screens to set up bandwidth
requirements by multicast group or port and to set up limits on the number of
multicast groups to which a port can subscribe.
Static Multicast Use this screen to configure static multicast entries.
Multicast VLAN Use these screens to set up multicast VLANs that can be shared among
different subscriber VLANs on the network.
Filtering Use this screen to configure packet filtering.
MAC Filter Use this screen to configure MAC filtering for each port.
Spanning Tree
Protocol
Use these screens to display Rapid Spanning Tree Protocol (RSTP) information
and configure RSTP settings.
Port Authentication Use these screens to configure RADIUS and IEEE 802.1x security settings.
Port Security Use this screen to limit the number of MAC address that can be learned on a
port.
DHCP Relay Use this screen to configure the DHCP relay settings.
DHCP Snoop Use these screens to drop traffic from IP addresses not assigned by the DHCP
server and to look at a summary of the DHCP packets on each port.
2684 Routed Mode Use this screen to configure the AAM1212 to handle 2684 routed mode traffic.
PPPoA to PPPoE Use this screen to enable PPPoA-to-PPPoE conversions on each port.
DSCP Use this screen to set up DSCP on each port and to convert DSCP values to
IEEE 802.1p values.
TLS PVC Use this screen to set up Transparent LAN Service (VLAN stacking, Q-in-Q) on
each port.
ACL Use this screen to set up Access Control Logic profiles and to assign them to
each PVC.
Downstream
Broadcast
Use this screen to block downstream broadcast packets from being sent to
specified VLANs on specified ports.
SysLog Use this screen to configure the syslog settings.
Access Control Use this screen to configure service access control and configure SNMP and
remote management.
Routing Protocol
Table 4 Web Configurator Screens (continued)
LABEL DESCRIPTION