ZyXEL Communications AAM1212-51, User Manual

Page: 297 / 435

AAM1212-51/53 Series User’s Guide
Chapter 45 IEEE 802.1Q Tagged VLAN Commands 297
The following example sets the default VID of port 1 to 200.
45.4.3 VLAN Priority Command
Syntax:
ras> switch vlan priority <portlist> <priority>
where
This command sets the priority of incoming frames with an IEEE 802.1Q VLAN tag.
The following example sets a priority of three for frames (with an IEEE 802.1Q VLAN tag)
that come in on DSL port 2.
45.4.4 VLAN Set Command
Syntax:
ras> switch vlan set <vid> <portlist>:<F<T|U>|X|N> [<portlist>:<F<T|U>|X>
...][name]
where
Figure 153 VLAN PVID Command Example
ras> switch vlan pvid 1 200
<portlist> =
You can specify a single port: <1>, all ports: <*>, a list of ports:
<1,3,enet1>, you can also include a range of ports:
<1,5,6~10,enet1,enet2>.
<priority> =
This is the priority value (0 to 7) to use for incoming frames
with an IEEE 802.1Q VLAN tag.
Figure 154 VLAN CPU Set Command Example
ras> switch vlan priority 2 3
<vid> =
The VLAN ID [1 – 4094].
<portlist> =
You can specify a single port: <1>, all ports: <*>, a list of ports:
<1,3,enet1>, you can also include a range of ports:
<1,5,6~10,enet1,enet2>.