ZyXEL Communications AAM1212-51, User Manual

Page: 342 / 435

AAM1212-51/53 Series User’s Guide
342 Chapter 51 SNMP
where
Use this command to add the host IP address to the list of trusted hosts. If you enter a trusted
host, your AAM1212 will only respond to SNMP messages from this address. If you leave the
trusted host set to 0.0.0.0 (default), the AAM1212 will respond to all SNMP messages it
receives, regardless of source.
51.1.4 Trap Community Command
Syntax:
ras> sys snmp trapcommunity <community>
where
Enter this command with the community to set the password.
51.1.5 Trap Destination Set Command
Syntax:
ras> sys snmp trapdst set <index> <ip> [<port>]
where
Use this command specify the IP address (and port number) of a trap server to which the
AAM1212 sends SNMP traps. If you leave the trap destination set to 0.0.0.0 (default), the
AAM1212 will not send any SNMP traps.
51.1.6 Show SNMP Settings Command
Syntax:
ras> sys snmp show
<ip> =
The IP address of a trusted host.
<community> =
The password sent with each trap to the SNMP manager.
<index> =
The number of the trap server (1~4).
<ip> =
The IP address of the trap server.
[<port>] =
The port number upon which the trap server listens for SNMP
traps. The AAM1212 uses the default of 162 if you do not
specify a trap port.