ZyXEL Communications AAM1212-51, User Manual

Page: 306 / 435

AAM1212-51/53 Series User’s Guide
306 Chapter 46 MAC Commands
This command removes a configured source MAC address from the DSL port that you
specify.
The following example removes the source MAC address of 00:a0:c5:12:34:56 from the MAC
filter for DSL port 5.
46.3 MAC Count Commands
Use MAC count commands to limit how many MAC addresses may be dynamically learned.
MAC count commands are listed next. When the MAC filter accept mode is enabled (see
Section 46.2 on page 303 ), the AAM1212 ignores the MAC count setting and accepts all of the
MAC addresses listed for the port in the MAC filter settings.
46.3.1 MAC Count Show Command
Syntax:
ras> switch mac count show [portlist]
where
This command displays the MAC count settings on the specified DSL port(s) or on all DSL
ports if no port is specified.
The following example displays the MAC count settings for DSL port 4.
<mac> =
The source MAC address in "00:a0:c5:12:34:56" format.
Figure 168 MAC Filter Delete Command Example
ras> switch mac filter delete 5 00:a0:c5:12:34:56
[portlist] =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
Figure 169 MAC Count Show Command Example
ras> switch mac count show 4
port status count
---- ------ -----
4 V 128