ZyXEL Communications AAM1212-51, User Manual

Page: 322 / 435

AAM1212-51/53 Series User’s Guide
322 Chapter 47 IGMP Commands
where
This command deactivates the specified multicast VLAN. The following example disables
multicast VLAN 12.
Figure 190 Multicast VLAN Disable Command Example
47.8.4 Multicast VLAN Enable Command
Syntax:
ras> switch igmpsnoop mvlan enable <vid>
where
This command activates the specified multicast VLAN.
47.8.5 Multicast VLAN Show Command
Syntax:
ras> switch igmpsnoop mvlan show <vlanlist>
where
This command displays the current multicast VLAN settings. In the state column, “-” indicates
the multicast VLAN is not active while “V” indicates the multicast VLAN is active.
Figure 191 Multicast VLAN Show Command Example
<vid> =
The multicast VLAN ID [1 – 4094].
ras> switch igmpsnoop mvlan disable 12
<vid> =
The multicast VLAN ID [1 – 4094].
<vlanlist> =
You can specify a single VLAN: <1>, all VLAN: <*>, a list of
VLAN: <1,3>, you can also include a range of VLAN:
<1,5,6~10>.
ras> switch igmpsnoop mvlan show 1
vid name F:fixed X:forbidden U:untag T:tag
---- ---------------- ----------------------------------------