Zodiac RE 42 Series, Instructions For Installation And Use Manual

Page: 119 / 531

12
2.7 I Good practices after each cleaning operation
2.7.1 Clean the filter as soon as the appliance is out of the pool
• The cleaner's performance may be reduced if the filter is full or dirty.
• Clean the filter in clean water as soon as the appliance is removed form the pool after each
cleaning cycle. Do not wait for the debris to dry.
• After each cleaning cycle, follow the steps for cleaning the filter, see "4.2 I Cleaning the filter".
2.7.2 Lay out the cable to reduce tangling
The appliance's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled will
guarantee better coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
2.7.3 Store the cleaner and cable
- Do not leave the appliance to dry out in sunlight after use.
- Store all the elements away from sunlight, humidity and bad weather.
- Screw the protective cap back on if you disconnect the floating cable from the control box.
• Place the cleaner vertically at the location provided on the trolley for it to dry out quickly. Roll up the cable carefully
and place it on the trolley handle (see figure ) .
• Store all elements away from direct sunlight and any splashes. A protective cover is available as an optional extra (see
figure ) .
Tip: Even if you do not own a trolley, the cable must still be carefully arranged for storage. Once rolled up,
the cable can be placed on a wall mount for example.