Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 46 / 80

01
03
05
07
06
02
04
08
46
CHAPTER
CLEANING
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
CLEANING THE RESIN VAT
ATTENTION: 6JGP('2ſNOKUXGT[FGNKECVGFQPQVUETCRGKV
Place the funnel and the fi lter on the resin bottle.
After fi ltering the resin, wash the vat to remove the
remaining resin (use water or alcohol depending on the
type of resin used).
Clean the resin vat using water or alcohol depending
on the type of resin used.
After the resin vat is cleaned and dried, reinstall it onto
the printer.
Repeat step 5 until the resin vat is totally clean,
including the vat edges.
Pour the remaining resin into the fi lter slowly, to avoid
spilling it.
IMPORTANT: Do not pour the cleaning water directly
in the sink in order to reduce enviromental impact
and avoid damages to the sink due to resin particles.
For more information, follow the instructions "How
correctly dispose of useless remains", which can be
requested at Zirkonzahn.
IMPORTANT: To remove liquid resin from the resin vat
without damaging the nFEP fi lm, it is recommended
to use the silicone sponge included in the Cleaning
Kit P4000 instead of the plastic scraper (the plastic
scraper is ideal to clean the building plate and
remove cured resin from the LCD and the nFEP fi lm).