Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 72 / 80

01 02
S
r
Pause
Power
Pause
72
CHAPTER
L300 POST CURING LAMP
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
Close the UV lamp door.
Press on the power button to start the
curing process.
STARTING THE CURING PROCESS
WARNING
- To start the curing process, the UV lamp door has to be closed completely.
- Do not stare at the UV curing lights without closing the door: risk of eye injury!
- This appliance can be used by children aged 8 and above as well as by persons with reduced
physical, sensory, or mental capabilities only under adult supervision and after ensuring
that appropriate instructions about the safe use of the machine have been transmitted and
understood. Children must NOT play, clean or maintain the device without adult supervision.
CLEANING THE DEVICE
Use sanitising alcohol to clean the outside of the device. Do not use any oily or corrosive liquids to
clean the device.