Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 20 / 80

20
CHAPTER
SAFETY AND RESIDUAL RISKS
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
POSSIBLE SOURCES OF DANGER
Possible sources of danger Security measure to be taken
P4000 Printer has a high dead weight
(see technical data). Risk of bruising
during transport and installation of
the device Wear work safety gloves and safety shoes
when setting up the P4000 Printer.
Components under electrical voltage
Defective power supply lines
Only use P4000 Printer with an intact power
supply system (including power cable).
Repairs and replacement of electrical
components must only be carried out by a
SWCNKſGFGNGEVTKEKCP
Vapour emissions Printing processes generates vapours.
Therefore, wear respiratory protection and
safety goggles when opening the P4000
Printer and especially when working with it
(cleaning, use of resins).
Chemical subtances Resin might cause skin irritations.
Therefore, wear protective gloves.
Moving parts The operation of the device is only possible
with the front door closed (the printing
plate moves downwards). Should the front
door be damaged, switch off the P4000
Printer and contact our customer support.
Risk of contusions caused by the front
door The front door must be closed manually.
$GHQTGENQUKPIOCMGUWTGVJCVſPIGTUQT
objects are not trapped.
+PUWHſEKGPVDGCTKPIECRCEKV[QHVJG
installation surface
Make sure that the installation surface can
bear the weigth of the printer.
Possible sparking when used improperly The P4000 Printer must not be used
unwatched.
9GTGEQOOGPFVJCVCUWKVCDNGſTG
extinguisher is kept ready in the vicinity
CPFVJCVCſTGFGVGEVQTKUKPUVCNNGF