Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 48 / 80

01 02
04
05
03
06
48
CHAPTER
CLEANING
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
REMOVING RESIN PARTS FROM THE NFEP FILM
During the printing process, some pieces of cured resin might fall into the vat and get stuck
QPVJGP('2ſNO(QNNQYVJGKPUVTWEVKQPUDGNQYVQTGOQXGVJGOEQTTGEVN[
IMPORTANT: 9GCTINQXGUYJGPTGOQXKPITGUKPRCTVUHTQOVJGP('2ſNO
contact with the resin might cause skin irritation!
ATTENTION: Clean well the resin vat after printing: during the next printing process, when the
DWKNFKPIRNCVGOQXGUFQYPYCTFEWTGFTGUKPRCTVKENGUOKIJVRWPEVWTGVJGP('2ſNOECWUKPITGUKP
spillage and damage to the LCD display. Wash the vat using water or alcohol depending on the
resin used.
Remove the resin from the vat (see the instructions
in "Cleaning the Resin Vat").
After fi ltering the resin, wash the vat to remove the
remaining resin (use water or alcohol depending on the
type of resin used).
To separate the nFEP fi lm from the resin, press the
nFEP fi lm from the underside with one hand ...
... and pick up the cured resin with the other hand
(wear protection gloves!).
IMPORTANT: Do not pour the cleaning water directly
in the sink in order to reduce enviromental impact
and avoid damages to the sink due to resin particles.
For more information, follow the instructions "How
correctly dispose of useless remains" which can be
requested at Zirkonzahn.
IMPORTANT: Use the plastic scraper to avoid
damages to the nFEP fi lm!
Metal scraper By hand
Plastic scraper