Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 21 / 80

21
CHAPTER
INSTALLATION SITE
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
IMPORTANT INSTRUCTIONS FOR SETTING UP THE P4000 PRINTER
The P4000 Printer has been designed for operation in protected and closed areas and
OC[QPN[DGOQXGFCPFRNCEGFQPUWHſEKGPVN[UVCDNGCPFNGXGNUWTHCEGUKPFT[
non-corrosive environments (see technical data).
Use the P4000 Printer in ventilated areas and do not expose the device to direct sunlight.
The resulting temperature differences could lead to print inaccuracies. For reasons of accuracy,
mantain a constant room temperature of 20 °C.
Protect the P4000 Printer and in particular the electronics installed on the rear side against
splash water.
-GGRCFKUVCPEGQHCVNGCUVOQPCNNUKFGUHTQOYCNNUGVEVQGPUWTGUWHſEKGPVCKTEKTEWNCVKQP
and good accessibility for repair and maintenance.
For ergonomic reasons, an appropriate working height should be provided. For optimum
accessibility to the processing area, consider the height of the open front door.
Work and danger areas must be easily visible and lighted (at least 500 lux).
The P4000 Printer should be set up in such a way that the main plug is easily reached during
operation and can be easily unplugged and checked in case of emergency.
The electrical power supply system must comply with the applicable national standards.
+PUVCNNCUWKVCDNGſTGGZVKPIWKUJGTKPVJGXKEKPKV[
INSTALLATION SITE