Zirkon zahn P4000 PRINTER, Operation And Maintenance Manual

Page: 17 / 80

17
CHAPTER
USAGE
ZIRKONZAHN – P4000 PRINTER OPERATION AND MAINTENANCE MANUAL – VERSION: 20/09/2022
INTENDED USE
6JG22TKPVGTJCUDGGPEQPEGKXGFHQTWUGKPVJGFGPVCNſGNFDWVKVECPCNUQDGWUGFHQT
the manufacture of non-dental objects.
The P4000 Printer is designed for processing resins with a wave length of 405 nm.
6JG&RTKPVGTKUQRGPU[UVGOJQYGXGTKVKURTQXKFGFYKVJCRTGEQPſIWTGFUGVQHRTKPV
parameters intended for use with the 3D resins by Zirkonzahn (for example, the Printer Resin
Waterbased Beige resin). If resins from other manufacturers are used, the user has to set
parameters for each processing step according to the resin used.
+VKUTGEQOOGPFGFVQWUGQPN[QTKIKPCN<KTMQP\CJPURCTGRCTVUGIVJGP('2ſNO
The use of the P4000 Printer requires a basic technical knowledge. Participation in a dedicated
training course offered by Zirkonzahn is recommended.
Zirkonzahn assumes no liability for any damage to health caused by possible vapours exposure in
connection with the P4000 Printer. The printer must be used with the front door closed.
Direct contact with moving parts is excluded if the printer is used correctly.
Use the printer in ventilated areas.
USAGE