Zip GP-SUPA004, Instruction Manual

Page: 65 / 381

© 2023 System Q Ltd
59
Index
ZipDVR.com
NTP (Network Time Protocol)
If your recorder can connect to the internet via a network or router, NTP will set the
time and date automatically for you. By default NTP is enabled so if your recorder is
already networked you will notice the time and date is already correct.
You can disable NTP or change the server if you wish.
DST (Daylight Saving Time)
DST is enabled by default for use in the UK. You can disable DST or adjust the
configuration here. If you need to re-configure DST at a later date you can do that in
the menu.
Time Offset: Here you can set by much the time changes at the start and end of
DST.
DST Mode: You can set DST mode to start and end by Week or by Date. Week is
selected by default as it allows you to set a none specific date such as the last
Sunday of March. Selecting Date allows you to specify a specific date.
Start Time: This is the time and date at which the clocks go forward.
End Time: This is the time and date at which the clocks go back.