Zip GP-SUPA004, Instruction Manual

Page: 318 / 381

31/08/2023
312
Zip DVR Manual V3
ZipDVR.com
Changing The Screen Size And Position
Clicking the Scale And Offset Setup button will display the image scale and offset
controls so that you can adjust the size and position of the recorders display on your
monitor. A red rectangle shows the edges of the display so you can ensure that this
is within the monitor's screen.
To adjust the Scale (size of display), X Offset (left and right position), Y Offset (up
and down position) select the corresponding radio button and use the left and right
arrows. To adjust the X or Y offset the scale must be below 100%.
Setting When The Mouse Cursor Disappears
The Cursor Hidden Display drop down list allows you to set how long the mouse
cursor remains visible on-screen after you last moved the mouse. This can be set
from 1 second up to 2 minutes. Once you move your mouse again the cursor will
reappear.
If you want the mouse cursor to remain on-screen at all times you can select Off from
the drop down list.
Adjusting The Speed Of The Mouse Cursor
You can set the mouse speed from 0 to 9 using the Cursor Acceleration slider. This
controls how fast the mouse moves around the screen and you may wish to change it
depending on the output resolution of the recorder. On a high resolution a fast mouse
speed may help so it doesn't take too long to move around. Where as on a low
resolution a slow mouse speed will stop the cursor zipping around making it difficult
to control.
Setting The Transparency Of Menus
The Transparency slider sets the opacity of the live view and main menu system.
The slider can be set from 0 to 128 with 0 being no transparency and 128 being 50%
transparency.