Zip GP-SUPA004, Instruction Manual, Page: 198 / 381

31/08/2023
192
Zip DVR Manual V3
ZipDVR.com
Editing A Stationary Object Area
You can edit an existing stationary object area as followed:
1. Select the Rule Number you want to edit the stationary object area for from the
Rule Number drop down list.
2. Click the red square in the top left corner of the stationary object area.
3. Click and drag the 4 corners to reposition them.
4. Click the red square in the top left corner to confirm and set the new positions.
Enabling And Disabling Individual Stationary Object Areas
You can turn each of the camera's 4 Rules On or Off independently as and when they
are needed as described below:
1. Select the Rule Number you want to turn On/Off from the Rule Number drop down
list.
2. Using the Rule Switch check box you can then turn the rule On (ticked) or Off
(unticked).
Trigger When An Object Is Introduced, Removed Or Both
There are 3 options as to what action will trigger SOD. We call these options Rule
Types .
To choose a Rule Type first select the Rule Number you want configure then select a
Rule Type as described below from the
Rule Type drop down list.
·
Legacy - This option will only trigger when an object moves into the stationary
object area and remains there.
·
Lost - This option will only trigger when an object which was originally inside the
stationary object area is removed.
·
Lost & Legacy - This option will trigger either when an object moves into the
stationary object area and remains or when an object is removed.
Deleting Stationary Object Areas
You have 2 options when removing stationary object areas from a camera; you can
remove individual areas or all areas as explained below:
Remove Individual Stationary Object Areas
To remove a stationary object area click the Red Square in the top left corner of the
area to select it and then click the Remove button to delete it.
Remove All Stationary Object Areas
To remove all stationary object areas from the chosen camera simply click the
Remove All button.