Zip GP-SUPA004, Instruction Manual

Page: 158 / 381

31/08/2023
152
Zip DVR Manual V3
ZipDVR.com
Target Recorder Settings
In the Add IP Camera window you will see a few editable settings, these are the
credentials used to connect to the target recorder and camera. These settings have
to match those of the target recorder otherwise you will not be able to connect to the
cameras.
Port
This needs to be the port in the router that the target recorder is assigned to. This will
be filled in automatically however you may need to check the settings on the target
recorder to see what this should be.
Protocol
The protocol should be detected and set automatically and in most cases you can
leave this as it is. For more information on configuring protocols see the
Protocol
Manage section.
Username & Password
These need to be the logon credentials for the admin account of the target recorder.
Once you are happy with the settings click Add to add the cameras to the recorder.
To exit without adding the cameras to the recorder click Cancel .
Note: If you are trying to add more cameras than there are channels available you
will get a message saying "No available channels to add more cameras". When
you see this message all available channels will have a camera added to them but
the leftover cameras will not be added to the recorder.
159