Zip GP-SUPA004, Instruction Manual

Page: 209 / 381

© 2023 System Q Ltd
203
Index
ZipDVR.com
Multi Angle
Ideal for general surveillance Multi Angle optimises the camera so that it can also
detect faces at various angles.
Customise
Selecting customise unlocks 4 extra settings so that you set up bespoke detection
angles to suit your requirements as described below:
·
Roll Range - is how far somebody can tilt their head (ear towards their shoulder)
and still be detected as a face. You can set the angle from 0 degrees so that a face
would have to be perfectly straight to 180 degrees so that the face can be tilted 90
degrees to either side.
·
Pitch Range - is how far a person can look up or down and still be detected. At 0
degrees the subject would have to be looking directly at the camera. At 180
degrees the subject can be looking towards the ground or towards the sky and
could still be detected.
·
Yaw Range - is how far somebody can be looking to the side and still be detected.
At 0 degrees the subject would have to be looking directly at the camera. At 180
degrees the subject can be side on to the camera and could still be detected.
Snap Frequency
You can set how often the recorder will capture a snapshot of the subject using the
Snap Frequency field. Enter the amount of time (in seconds) you want between each
snapshot to set the snap frequency.
This timer will remain active as long as the subject is present. If the subject leaves the
camera's image and returns a snapshot will be captured and the timer will start over.
Minimum Size Of Objects Detected
You can set the minimum size of objects that are detected in the Min Pixel field. You
can enter a minimum width between 64 pixels to 1080 pixels.
This is useful as the area you are monitoring will differ from camera to camera. If the
area you are monitor is far from the camera you you would want to set a small
minimum width as pedestrians and vehicles will appear small on-screen. However, if
the area you are monitoring is fairly close to the camera so that pedestrians and
vehicles appear quite large you can set a higher minimum width to avoid false
triggers.
Detection Sensitivity
By setting the Sensitivity you can avoid false triggers or capture slight movements.
You can enter a sensitivity level between 0 and 100.