Zip GP-SUPA004 Instruction Manual Download Page 35

Page: 35 / 381

Index

ZipDVR.com

3.2 Setup - Hard Drive Installation

If you are installing your own hard drives you will need to follow the steps below:

1. Power down the recorder and disconnect it from the power source.

2. Remove the screws holding the top cover to the rear panel and then remove the

top cover.

3. Connect a Sata cable and hard drive power cable to the main board.

4. Secure the hard drive into place and then connect the Sata cable and hard drive

power cable.

5. Replace the top cover, reconnect the power supply and start up the recorder.

6. Go into

Storage Menu - Disk

sub-menu.

7. Tick the check box next to the new hard drive and then click the

Format HDD

button.

Note:

For the best performance it is strongly recommended that you use a

surveillance grade HDD from a reputable manufacturer.

292

Summary of Contents for GP-SUPA004






























































































































































































































































































































































































Search results

Summary of Contents for GP-SUPA004

Reviews:

Related manuals for GP-SUPA004

Brands by name

Popular brands

Zip GP-SUPA004, Instruction Manual

Search results

Summary of Contents for GP-SUPA004

Reviews:

Related manuals for GP-SUPA004

Brands by name

Popular brands