Zip GP-SUPA004, Instruction Manual

Page: 214 / 381

31/08/2023
208
Zip DVR Manual V3
ZipDVR.com
Editing A Cross Counting Line
You can edit an existing cross counting line as followed:
1. Select the Rule Number you want to edit the line crossing for from the Rule
Number drop down list.
2. Click the red square at the start of the line.
3. Click and drag the the start and end points to reposition them.
4. Click the red square at the start of the line to confirm and set the new positions.
Choosing Which Direction Of Line Crossing Causes A Trigger
There are 2 options as to what direction of movement will trigger CC. We call these
options
Rule Types .
For simplicity we label the area on one side of the line A and the area on the other
side of the line B . The direction of movement is also indicated by the light blue arrow
in the middle of the line. To choose a Rule Type first select the Rule Number you want
configure then select a Rule Type as described below from the
Rule Type drop
down list.
·
A->B - This option will only trigger when an object moves across the line from side
A to side B.
·
B->A - This option will only trigger when an object moves across the line from side
B to side A.
Deleting Cross Counting Lines
You have 2 options when removing cross counting lines from a camera; you can
remove individual lines or all lines as explained below. As you can currently only
create 1 cross counting line both methods will have the same effect:
Remove Cross Counting Lines
To remove a cross counting line click the Red Square at the start of the line to select
it and then click the Remove button to delete it.
Remove All Line Crossings
To remove all cross counting lines from the chosen camera simply click the Remove
All button.
Saving Changes
When you are happy with the current settings click the Save button. If you exit the
window without saving any changes will be lost.