Zip GP-SUPA004, Instruction Manual

Page: 258 / 381

31/08/2023
252
Zip DVR Manual V3
ZipDVR.com
11.4 Alarm Menu - PTZ Linkage
The PTZ Linkage sub-menu is a great way enhance your security system. It allows
you to tell PTZ cameras to move to a specific location when an alarm input is
triggered or motion detected by another camera. This is achieved by activating one
of the PTZ's preset locations.
This could be used to tell one PTZ to look at the main gate and a second PTZ to look
at the rear entrance when a PIR detects movement for example.
The settings available will differ depending on recorder, camera type and camera
model.
Setting Up PTZ Linkage
1. Selecting Your Camera
The first thing you need to do is choose which camera you want to set up PTZ linkage
for. The
Camera column shows all analogue and IP cameras connected to the
recorder. Once you have found the camera you want to configure, tick the Switch
check box to enable PTZ linkage for that camera.
2. Using Motion Detection To Control PTZ Cameras
You can use the motion detection of any analogue or IP camera to control up to 4
PTZ cameras.