Zip GP-SUPA004, Instruction Manual

Page: 228 / 381

31/08/2023
222
Zip DVR Manual V3
ZipDVR.com
As a rule of thumb we recommend setting the I Frame Interval at double the frame
rate so that a new I Frame is captured every 2 seconds.
For example if the frame rate is 12 frame per second (FPS) the I Frame Interval
would be set as 24 so that the recorder captures a new I Frame every 24 frames.
Event Triggered Recording (ETR)
ETR allows you to use different recording settings when an alarm is triggered
compared to normal recordings. This is usually used to increase the video quality so
that you have the best footage possible when an event occurs.
Ticking the ETR check box for a camera will display a new row of settings below the
camera with the stream type Alarm . These are the record settings for when an alarm
is triggered and can be configured in the same way as the normal stream.
Copying Stream Settings From One Camera To Another
Rather than re-entering the same settings for each camera you can copy settings
from one camera by clicking the
Copy button. For more information on copying
settings see the Parameter Copy section.
Defaulting Settings
You can restore settings back to their default value by clicking the Default button.
Saving Changes
Once you are happy with your settings click the Apply button to save them.
Alternatively you can right click with the mouse to exit the Mainstream menu without
saving changes.
350