Zip GP-SUPA004, Instruction Manual

Page: 202 / 381

31/08/2023
196
Zip DVR Manual V3
ZipDVR.com
Selecting Your Camera
You can select the camera you want to configure the detection area for from Camera
drop down list.
Creating A Detection Area
Creating a detection area allows you to specify a portion of the camera's image to
monitor rather than the entire screen. To create a detection area just follow these
easy steps:
1. Click on the camera's image where you want to set the top left corner of the
detection area.
2. Click where you want to set the bottom left corner.
3. Click where you want to set the bottom right corner.
4. Finally click where you want to set the top right corner of the detection area.
You will notice as you are setting your corner points the recorder will draw a red box
between between the points.
Editing A Detection Area
You can edit the existing detection area by simply dragging any of the red corner
squares to where they are required.
Determining When Thumbnail Snapshots Are Captured
You can determine how the recorder will capture thumbnail snapshots when a person
or vehicle is detected using the
Snap Mode drop down list.
Default: Will only capture a snapshot when subjects are first detected. Additional
thumbnail snapshots will only be captured if the subject leaves the camera's image
and returns
Realtime: Will only capture a snapshot when subjects are first detected. Additional
thumbnail snapshots will only be captured if the subject leaves the camera's image
and returns.
Interval Mode: Will allow you to specify how many and how often thumbnail
snapshots are captured using the Snap Num and Snap Frequency fields.
Number Of Snapshots
You can set how many snapshots are captured for each subject using the Snap Num
field.
1: Will capture a single snapshot when the subject is first detected.