Introduction
4
025-9567E
CLEAR ENTRY
If a mistake is made while entering pager codes into the keypad stack, depression of the
CLEAR ENTRY
key will erase the last entry, and allow the corrected code to be entered.
ENTER
This key is used to “enter” pager codes into the keypad stack. First enter the pager code into
the Model 25 from the keypad, then press
ENTER
, the code will be inserted into the keypad
stack.
ALERT
Many times, it is desirable to send an “Alert Tone” after a page. Although it is possible to
accomplish this by programming an Instant Call button, it is also possible to send manually
one of the four alert tones available in the Model 25 by:
1.
Entering a single digit from the keypad
0 = Single Tone Alert
1 = Slow Siren
2 = Fast Siren
3 = HI/LO Siren
2.
Press and hold the
ALERT
key for the duration of the desired alert.
Instant Call Buttons
The Model 25 contains 29 Instant Call buttons for “one-button” paging. Each of the Instant
Call Buttons may contain a single call or a group of calls from any of the formats available in
the encoder. This allows multiple units or individuals to be paged, and the correct channels to
be automatically selected by the press of a single button.
As many as 16 Instant Call buttons may be pressed at one time, the Model 25 will send the
pages of each button in the order in which they were pressed.
Each Instant Call button may be programmed to:
Send a single page or group of pages containing any format assigned in the encoder.
Automatic Channel Select of the proper channels for transmission.
Send an “alert” tone to audibly alert personnel as to the urgency of a call.
Summary of Contents for Model 25
