Copyright(C)2012ZeroUAV
All Rights Reserved
40
15 Firmware Upgrade
The upgrade of YS-X6 firmware is simple. Before firmware upgrade, please
download the special firmware upgrade tool on Zero UAV official website:
http://www.zerouav.net/kefu.aspx
USB Cable Connection: plug one end of USB cable in box to PC USB port , and
the other end to FC COM1.
Warning:
Warning:
Warning:
Warning:
COM3 is used for connecting to Data link or WIFI, and COM1 for upgrade. Wrong
connection will lead upgrade failure.
Upgrade
Upgrade
Upgrade
Upgrade Steps:
Steps:
Steps:
Steps:
Step1
Step1
Step1
Step1
Please do not power on FC and if FC is powered please disable it.
Enable the special programme "YS-X6 PC Firmware Upgrade" for upgrade ,click
on "AP Firmware Upgrade",the software will be enabled and shown as below:
Step2
Step2
Step2
Step2
Select COM port for upgrade (if do not know which COM on PC, please click with
right
mouse
“my
computer”
->
“attribute”
->
device
manager”
->
“port”
(COM/LPT)to have a check). Click on
“Config COM”
, then setup its
property to be(as the diagram below):
Baud rate: 115200
