Zero YS-X6, Quick Start Manual

Page: 43 / 60

Copyright(C)2012ZeroUAV All Rights Reserved 43
Appendix
Appendix Appendix
Appendix 1
1 1
1:::: L
L L
LED
ED ED
ED D
D D
Description
escription escription
escription
Flight States
GPS unlocated, red light blinks for 3 times one loop.
●●● ●●● ●●●
GPS satellites=5, red light blinks for 2 times one loop.
●● ●● ●● ●●
GPS satellites=6, red light blinks for 1 time one loop.
● ● ● ● ● ●
GPS satellites>7, the Led doesn't blink.
●
Abnormal craft status=White light blinks
When GPS from attitude is too large, Led blinks in white(craft status is
abnormal).
███████████████
When craft gets stable after big action:
If white light is off, craft can continue to fly;
●
If white light keeps going on, need to land craft urgently.
▇▇▇▇▇▇▇▇▇▇
Altitude hold in the Stabilization mode=Blue light periodically blinks
Blue light blinks for one time one loop means users is operating;
● ● ● ●
Blue light blinks for two times one loop means Altitude hold.
●● ●● ●●
GPS mode=Green light periodically blinks
Green light blinks one time one loop means the user is operating;
● ● ● ●
Green light blinks for two time one loop means Auto-hover and Altitude Holding.
●● ●● ●● ●● ●● ●●
Low voltage alert
Low voltage alert=Red light fast blinks;
●●●●●●●●●●●●●
Low voltage alert urgently=Red light keeps going on.
▇▇▇▇▇▇▇▇▇▇
Compass Calibration
Attitude error< 3
°
, light keeps going on, it means can go around to calibrate.
Attitude error> 3
°
, light will be off, it means the craft is not placed in horizontal
and need to be adjusted to be level.
●
After Magnetic data calibration, the Purple light keeps going on during data
reading. LED will get normal when data reading is finished.
▇▇▇▇▇▇▇▇▇