Copyright(C)2012ZeroUAV
All Rights Reserved
28
Click on
"enable course locked"
button in
"setting"
page, autopilot can record
the current orientation of craft nose. Then users can adjust the orientation of
craft nose with rudder;when users operate the left/right aileron and push/pull
sticks on transmitter, the autopilot will fly to the orientation as
the course was
locked, not the current orientation of craft nose.
Option 2
Within 5 seconds please switch between position1 and position2 on CH6 for five
times(do
not
switch
to
position3
which
is
invalid,
that
is
1->2->1->2->1->2->1->2->1->2->1 ), then FC will enter intelligent course
locked mode.
To exit "carefree", click on
"disable course locked"
button in
"setting"
page or
switch to manual mode. User can switch to manual mode and immediately back
to GPS mode to continue the operation.
10 Parameter Setup
Default Parameters
The Factory Default Parameters are shown as below. It is the Quad-X flying
mode and can be applied to most crafts for direct flying.
