Copyright(C)2012ZeroUAV
All Rights Reserved
3
•
When ESC and motors working, they will produce serious magnetic
interference, so GPS and magnetic sensor module must be installed by
nonferrous to keep far away from motor and ESC (especially the Octo-rotor),
and the arrow is towards aircraft nose. Otherwise, the aircraft will fly circling
around and incorrectly hover. As there are rich eletric current in the batterywire
which can produce magnetic field, users must place the batterywire far away
from GPS and magnetic sensor module, otherwise the craft will fly in circle in
GPS mode.
•
When using gimbal, user need to power on the servo. Just leave one ESC
powered on if ESCs come with bec function and dump others’ power. Plug the
battery of one servo to any of the M1~M8 if ESCs come without bec function.
Warning:
When using image transmission, users must make the image transmission far
away from IMU to avoid the interference.
2 Debugging and WIFI Set
