Copyright(C)2012ZeroUAV
All Rights Reserved
33
Steering
Steering
Steering
Steering gear
gear
gear
gear Frequency
Frequency
Frequency
Frequency
Input the correct value according to your servo type: 50HZ for Analog Servo,
250HZ and 333HZ for Digital Servo.
11 Power module & Speed sensor
When YS-X6 is connected with power management module, user can directly
observe the present discharge current and battery consumption in “data ” page
of GCS.
If to use this function, user must first connect power management module with
YS-X6(connect to A1N1 plug on YS-X6), push the throttle stick to the bottom,
then repower YS-X6 on. After powering, FC will zero sensor automatically, the
current discharge (ampere A) and battery consumption(MAH) start to output
according to the detection by power management module.
12 Data Link connection extension
Tips
：
•
User can purchase datalink XB-PRO900 on selection to extend the
