Copyright(C)2012ZeroUAV
All Rights Reserved
32
Remote Control Mode
User can select the options below according to yourself RC mode,
do not set up
incorrectly!
Self-adaptive:
AP select the options according to the using RC Tx.
The RC Tx
must be enabled first before autopilot enabled.
Normal: Ordinary FUTABA Receiver, AP CH1 connect to Receiver CH1, AP CH2
connect to Receiver CH2.
S-BUS:
Only connect AP CH7 to the Receiver S-BUS port.
PPM:
PPM is supported, only connect AP CH8 to Receiver PPM.
Volt
Volt
Volt
Volt Alert
Alert
Alert
Alert Threshold
Threshold
Threshold
Threshold
Fill in the alert voltage of each battery which is been using, need user to fill in
after measuring by self. Usually fill in 3.65.
ESC
ESC
ESC
ESC Type
Type
Type
Type
Fill in the ESC type which is been using.
Note:
Fault filling of ordinary ESC and XA ESC will result that the propellers go out of
control after power connected, dangerous!
