Zero 88 FLX Series, Manual

Page: 166 / 233

The Load tab of Setup is used to load in various file types. The option
at the top of the window allows you to choose your USB storage
device to load from. If your USB storage device doesn't appear, tap
Refresh.
The Filename, Size and Date columns, can be sorted, by tapping the
column headers. The Date column is not shown on FLX S, as FLX S
consoles do not have an internal clock.
On FLX, you can click on a file, and use the up/down arrows to
navigate through the list of files. Hold Shift and tap the up/down arrows
to skip through the list of files.
The different file types which can be loaded are explained below:
ZerOS Show files
Any ZerOS Show file, saved from any console or Phantom ZerOS, can be loaded onto the console from a USB
Storage Device. For ultimate compatibility, it is suggested that both consoles are running the same software version.
When loading a show file, all information on the console will be lost. Therefore, ensure you save your current show
first before loading another file.
Two formats of ZerOS show files can be loaded; .zos and .isf files. .zos show files are ZerOS show files saved in
ZerOS 7.9.8 or later. .isf show files are "legacy" show files, saved in ZerOS 7.9.7 or earlier.
Select the show file you wish to load in and press Load to load the show. The console will load the show and you
will automatically leave Setup.
When loading a ZerOS Show file, you are given three options – Load Complete Show , Load Setup Only and
Load Setup & Palettes . Loading a complete show brings the console back to the same settings that were defined
when the show was stored - Patch information, Cue Information, UDKs, Palettes, Groups, Macros, Desk Setup and
Network settings will all be restored. Loading just the setup, will give all your settings and the patch, however load
none of the programming in the show file. Loading setup and palettes, is especially useful if you always use the same
rig with your console - your base configuration including palettes will be loaded, ready for you to program the next
show.
After clicking "Load", the console will warn you that the current show
on the console will be lost. Click Yes to proceed with loading the new
show, and overwrite the current show on the console. Click No if you
need to save the current show first, prior to loading in the new show.
Zero 88 - ZerOS - Page 166 of 233 Printed: 23/11/2020 12:50:03 JH