Zero 88 FLX Series, Manual

Page: 141 / 233

Now tap "Red" on the touchscreen again, and you should see it goes
back to having a dark blue background. Now tap "Green" on the
touchscreen above the encoder.
Now tap Record, and tap the button under the Playback you wish to
control GREEN. Now tap "Green" on the touchscreen again, and you
should see it goes back to having a dark blue background. Now tap
"Blue" on the touchscreen above the encoder.
Now tap RECORD, and tap the button under the playback you wish to
control BLUE.
Now tap the middle encoder button of any of the RGB encoders to
take you to the colour picker, and drag the onscreen fader to the right
of the picker to 0%.
Now turn the fixtures on to full intensity. You can use the intensity wheel to do this, by pressing Z, and using the first
encoder. Note the fixtures won't come on, as they are currently black.
Now tap Record, and tap an empty playback button - this playback is your Colour Mix Intensity fader.
Now hold Setup, and tap the Playback button of the "Red" fader, and
tap "Colour" under "Fader Controls..." so that it has a red stripe next to
it, and press OK.
Repeat this for the Green and Blue fader.
Tip - whilst you're in the playback settings, tap Advanced from the top, and you can give your playbacks a name.
Now clear the programmer by pressing the Clear button twice, and then when you want to Colour mix raise your
Colour Mix Intensity playback - note by default this playback will have a 3 second fade time for colour, which you may
wish to remove. To do this press and hold View and tap the playback's button. In the cue list window you may set
the colour fade to 0 seconds.
You can then use your RGB faders to colour mix on your fixtures. Raising all four will give you full white.
Zero 88 - ZerOS - Page 141 of 233 Printed: 23/11/2020 12:50:03 JH