Zero 88 FLX Series, Manual

Page: 116 / 233

Naming Cues
Naming is really important, to ensure you know what a cue will dowhen
output. You could name the cue with a brief description of whatthe cue
does, or more commonly in theatrical shows, you could namethe cue
with a description of when the cue should be triggered. Forexample, a
line in the script, or when a performer does something onstage.
To name a cue, double touch/click the “Name” cell in the Cues
Window. An onscreen keyboard will be displayed to name the cue. An
external keyboard can also be used.
FLX users can also navigate the Cues window like a spreadsheet, meaning you can use the arrows keys to navigate
to the name field you require, and then press Enter .
Naming cues with syntax
FLX users can use the following commands to name a cue:
Name 5 Enter
Name 5
This will name cue 5 within the playback you are currently viewing.
Name 5 Playback button 3
Name 5
This will name cue 5 within Playback 3.
Once again, an onscreen keyboard will then be displayed to type the cue’s name. Press Enter or OK to confirm.
Rather than recording the cue, and then naming them afterwards, you can name the cue at the point of recording it.
This is done by using the normal Record syntax, however by pressing Name instead of Enter :
Record Name
This will record the next available cue, within the playback you are currently viewing, and allow you to name it.
Record 5 . 5 Name
This will record cue 5.5, within the playback you are currently viewing, and allow you to name it.
Zero 88 - ZerOS - Page 116 of 233 Printed: 23/11/2020 12:50:03 JH