Treatment
Perform a Treatment
User Manual
39
4.
With the locking lever in the Unlocked position, press the applicator connector down onto the
connector plate gently but firmly.
5.
When the connector meets resistance, stop pressing down.
6.
Turn the locking handle 180° clockwise to the Locked position.
The connector is pulled into the connector plate and locked in place.
7.
Slip the applicator cable into the loop at the top of the support arm.
8.
Apply Velcro
®
straps to connect the applicator cable to the support arm.
The applicator is authenticated.
When the process is complete, the authentication confirmation and the
Card?
cue are displayed in the
middle of the screen.
The name of the applicator is displayed in the lower left corner.
In this example, the applicator name is
CoolCore
.
For information about status lights and touch pad controls, refer to the
directions for use for your applicator.
