Cleaning and Maintenance
Connecting Latches, Hoses, and Cables
User Manual
61
6.
Ensure that the cables and hoses are clear.
7.
Connect the latches, cables, and hoses.
8.
Ensure that the upper module is aligned to the base module.
Connecting Latches, Hoses, and Cables
►
To connect a latch:
1.
Place the top clasp over the top hook.
2.
Flip the handle of the latch outward.
3.
Turn the handle clockwise until the top clasp is snug against the hook.
4.
Press the handle down.
►
To connect the hoses and cables:
1.
Start with the hose on the right.
2.
Press the hose into the jack.
3.
Repeat for the hose on the left.
4.
Press the cable connector on the right over the post.
5.
Turn the ring clockwise until it is snug. Do not overtighten.
6.
Repeat for the remaining cables, working from right to left.
7.
Close the cover of the access panel.
8.
Align the thumbscrew on the cover of the access panel to the hole on the upper module.
9.
Turn the thumbscrew to the right just until it is snug. Do not overtighten.
