Preventive Maintenance
Cleaning and Maintenance
56
BRZ-101-TUM-EN2-L
Coolant
Coolant circulates between the control unit and the applicator to remove heat from the applicator. When you
connect a new applicator, it takes up a significant amount of coolant. Also, when you disconnect an applicator,
or disconnect the hoses on the access panel to prepare for shipping a module, a small amount of coolant may
be lost.
When the level of coolant is low, the control unit displays a message. It is safe to add coolant while the control
unit is powered on.
CAUTION: The use of unauthorized coolant has not been tested. Always use
coolant authorized by ZELTIQ.
►
To add coolant:
1.
Locate the chiller tank cap.
2.
Press down on the recessed end of the blue lever on the chiller tank cap.
The handle flips up.
3.
Turn the blue handle counter-clockwise until the cap disengages.
4.
Remove the cap.
5.
Pour coolant into the tank.
