ZELTIQ CoolSculpting System User Manual Download Page 62

Page: 62 / 86

Customer Service

Cleaning and Maintenance

BRZ-101-TUM-EN2-L

►

To connect the data modem cable:

Grasp the head of the data modem cable.

Ensure that the USB symbol is facing upward.

Insert the head of the cable into the upper USB port.

Customer Service

To report issues with the performance or use of your System, contact ZELTIQ Customer Service.

•

Worldwide: (+1) 925-474-8160

•

United States: 1-888-935-8471 (1-888-ZELTIQ1)

Routine Issues

For questions regarding device performance or to report issues that do not interfere with current patient
treatments:

•

Call during regular business hours, 6 am to 6 pm, Pacific Time, Monday through Friday. Calls are answered
in the order received.

Urgent Issues

To report safety concerns or issues that interfere with current patient treatments:

Call at any time. Outside regular business hours (above), leave a voicemail. A technician will be paged and
will return your call promptly.

Summary of Contents for CoolSculpting System























































































Search results

Summary of Contents for CoolSculpting System

Reviews:

Related manuals for CoolSculpting System

Brands by name

Popular brands

ZELTIQ CoolSculpting System, User Manual

Search results

Summary of Contents for CoolSculpting System

Reviews:

Related manuals for CoolSculpting System

Brands by name

Popular brands