System Overview
Control Unit
User Manual
31
Power Cord Clamp
The power cord clamp attaches the power cord to the rear of the control unit. Install the power cord clamp
before using the system. If the power cord is dislodged during a treatment, the treatment will be ended
abruptly.
►
To install the power cord clamp:
1.
Insert the thumbscrew into the hole on the rear of the control unit.
2.
Using your fingers, turn the thumbscrew until it is snug.
Power Switch and Power Receptacle
The power switch controls power to the control unit and system components. The power receptacle houses
the plug for the power cord.
Components
1.
Power Switch
2.
Power Receptacle
►
To power on the control unit:
1.
Insert one end of the power cord into the power receptacle.
2.
Insert the other end of the power cord into a grounded wall outlet.
3.
Press the power switch on the back of the control unit to the On position.
4.
The control unit powers on and displays the first screen.
Potential Equalization Test Connector
The test connector is for use by trained personnel only.
Access Panel
►
To open the access panel cover:
1.
Turn the thumb screw on the cover counterclockwise until it is loose.
