System Symbols
System Overview
18
BRZ-101-TUM-EN2-L
Catalog number
Indicates the manufacturer
’
s catalog number
so that the medical device can be identified.
Per ISO 15223-1
Reg. No. 2493
Serial number
Indicates the manufacturer
’
s serial number so
that a specific medical device can be identified.
Per ISO 15223-1
Reg. No. 2498
Quantity
Batch code
Indicates the manufacturer
’
s batch code so
that the batch or lot can be identified.
Per ISO 15223-1
Reg. No. 2492
Protective earth ground
To identify any terminal which is intended for
connection to an external conductor for
protection against electric shock in case of a
fault, or the terminal of a protective earth
(ground) electrode.
Per IEC 60417
Reg. No. 5019
WARNING: High voltage
Per IEC 60417
Reg. No. W012
Equipotential contact
To identify the terminals which, when
connected together, bring the various parts of
an equipment or of a system to the same
potential, not necessarily being the earth
(ground) potential, e.g. for local bonding.
Per IEC 60417
Reg. No. 5021
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating current
only; to identify relevant terminals.
Per IEC 60417
Reg. No. 5032
Use by date
Indicates the date after which the medical
device is not to be used.
Per ISO 15223-1
Reg. No. 2607
Special disposal methods are required for this
electrical device. Refer to local and national
regulations.
Per Directive 2002/96/EC (WEEE)
Locked position
To identify the location of a lock. To identify
the control that effects a locking function. To
indicate that the component or function is in
its locked state.
Per IEC 60417
Reg. No. 5569
Unlocked position
To identify the control that effects an
unlocking function. To indicate that the
component or function is in its unlocked state.
Per IEC 60417
Reg. No. 5570
On (Power)
To identify the control that starts a function
or operation. To identify the control that
enables a function or operation to be engaged
or activated.
Per IEC 60417
Reg. No. 5007
Off (Power)
To identify the control that stops a function or
operation. To identify the control that disables
a function or operation to be engaged or
activated.
Per IEC 60417
Reg. No. 5008
Peel here
Single patient use
