Zeiss VISULAS YAG III User Manual Download Page 59

Page: 59 / 126

Installation

000000-1272-175-GA-GB-060613

Installation of ACCENTO eyepiece to VISULAS YAG III/
VISULAS YAG III Combi and VISULAS Trion Combi

The ACCENTO eyepiece can be used alternatively for displaying the

treatment parameters in the display field of the slit lamp.
To install, proceed as follows:

•

Switch off the VISULAS YAG III and disconnect the power cable.

•

Carefully remove the desired eyepiece (right or left; 2, Fig. 21) from the
tube of the slit lamp.

•

Insert the ACCENTO eyepiece (1, Fig. 21) and push it in as far as it will go.



The connecting cable of the ACCENTO eyepiece will point vertically
downwards.

1  ACCENTO eyepiece
2  Eyepiece
3  Slit lamp

Fig. 21

LSL YAG III laser slit lamp

Summary of Contents for VISULAS YAG III































































































































Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands

Zeiss VISULAS YAG III, User Manual

Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands