Zeiss VISULAS YAG III, User Manual

Page: 113 / 126

Electromagnetic compatibility
000000-1272-175-GA-GB-060613
107
Electromagnetic compatibility
Special precautionary measures apply to this device with regard to
electromagnetic compatibility (EMC). To avoid electromagnetic disturbances,
the device may only be installed, operated and serviced in accordance with the
user manual and using the components supplied by Carl Zeiss Meditec.
CAUTION - GENERAL HAZARDS
Portable and mobile RF communications equipment may affect the device.
When operating radio devices or components for radio transmission, observe
the distances to all system components recommended in this section.
CAUTION - RISK OF ELECTROMAGNETIC RADIATION
The VISULAS YAG may not be placed next to or stacked together with other
equipment with the exception of device configurations described in this
user manual. If operation close to or on top of other devices is necessary,
the VISULAS YAG III must be closely observed to monitor proper
functioning in this configuration.
Replacement cables may only be purchased at Carl Zeiss Meditec.
The use of accessories, all types of transducers and cables not specified in
this user manual or not sold by Carl Zeiss Meditec as replacement parts may
result in higher emissions or reduced immunity of the device.
Relevant accessories, cables and transducers:
- Power cable of laser console VISULAS YAG III (2,5 m)
- Foot switch with connection cable (1,2 m)