Zeiss VISULAS YAG III User Manual Download Page 11

Page: 11 / 126

Notes on the user manual

000000-1272-175-GA-GB-060613

Explanation of symbols used

The symbols used in this user manual refer to important safety information

which warn against possible health risks or fatal injuries and contain useful

notes. Whenever you see these symbols, read the accompanying information

carefully and observe all safety notes and information in this user manual

and on instrument labels.

WARNING
Indicates a hazardous situation which may result in fatal or serious bodily

injury if the appropriate safety precautions are not heeded.

CAUTION
Indicates a hazardous situation which may result in minor injury if the
appropriate safety precautions are not heeded.

CAUTION - PROPERTY DAMAGE
Indicates possible device damage if the appropriate safety precautions are
not heeded.



Information, hints and advice for a better understanding of the

instructions to be observed in the operation of the instrument.

Summary of Contents for VISULAS YAG III































































































































Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands

Zeiss VISULAS YAG III, User Manual

Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands