Zeiss VISULAS YAG III, User Manual

Page: 72 / 126

Operation of the device
000000-1272-175-GA-GB-060613
66
Aiming beam
Switch on the aiming beam.
In Treatment STANDBY mode, the aiming beam is
switched on and off by touching this button. If the
aiming beam is on, this button appears in reverse color.
Aiming beam intensity
After touching this button, the intensity of the aiming
beam can be adjusted by turning the rotary knob.
STANDBY/READY
Display and switch between STANDBY/READY
Touching this button switches the system into Treatment
READY mode after approximately three seconds. This
transition time is visually indicated by a blinking button.
Touching this button again returns the system to
Treatment STANDBY mode.
The key illustrated is the STANDBY key.

If the system has been in Treatment STANDBY mode for more
than 30 minutes, on switching to Treatment READY mode the
system will release a series of internal laser shots in order to update
the energy values for each pulse mode.
Information mode
Touching the info button in Treatment STANDBY mode switches the
system into Information mode (Fig. 27).
Fig. 27 Information mode